Select

SCPI Commands

CONFigure:DATA:CONTrol:IMS<Ims>:VIRTualsub<VirtualSubscriber>:EVS:SYNCh:SELect

class Select

Select commands group definition. 1 total commands, 0 Sub-groups, 1 group commands

get(ims=<Ims.Default: -1>, virtualSubscriber=<VirtualSubscriber.Default: -1>) → RsCmwDau.enums.BwRange

# SCPI: CONFigure:DATA:CONTrol:IMS<Suffix>:VIRTualsub<VirtualSubscriber>:EVS:SYNCh:SELect
value: enums.BwRange = driver.configure.data.control.ims.virtualSubscriber.evs.synch.select.get(ims = repcap.Ims.Default, virtualSubscriber = repcap.VirtualSubscriber.Default)

Selects a configuration mode for the bandwidth and bit-rate settings of the EVS primary mode. The uplink (receive) and the downlink (send) can be configured together (COMMon) or separately (SENDrx) .

param ims

optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Ims’)

param virtualSubscriber

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘VirtualSubscriber’)

return

bw_range: COMMon | SENDrx COMMon The following commands apply: method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.BwCommon.set method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Common.Bitrate.Range.set SENDrx The following commands apply: method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Send.Bw.set method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Send.Bitrate.Range.set method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Receive.Bw.set method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Receive.Bitrate.Range.set

set(bw_range: RsCmwDau.enums.BwRange, ims=<Ims.Default: -1>, virtualSubscriber=<VirtualSubscriber.Default: -1>) → None

# SCPI: CONFigure:DATA:CONTrol:IMS<Suffix>:VIRTualsub<VirtualSubscriber>:EVS:SYNCh:SELect
driver.configure.data.control.ims.virtualSubscriber.evs.synch.select.set(bw_range = enums.BwRange.COMMon, ims = repcap.Ims.Default, virtualSubscriber = repcap.VirtualSubscriber.Default)

Selects a configuration mode for the bandwidth and bit-rate settings of the EVS primary mode. The uplink (receive) and the downlink (send) can be configured together (COMMon) or separately (SENDrx) .

param bw_range

COMMon | SENDrx COMMon The following commands apply: method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.BwCommon.set method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Common.Bitrate.Range.set SENDrx The following commands apply: method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Send.Bw.set method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Send.Bitrate.Range.set method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Receive.Bw.set method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Receive.Bitrate.Range.set

param ims

optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Ims’)

param virtualSubscriber

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘VirtualSubscriber’)