Range¶
SCPI Commands
CONFigure:DATA:CONTrol:IMS<Ims>:VIRTualsub<VirtualSubscriber>:EVS:SEND:BITRate:RANGe
- class Range[source]
Range commands group definition. 1 total commands, 0 Sub-groups, 1 group commands
- class RangeStruct[source]
Structure for setting input parameters. Fields:
Bitrate_Lower: enums.Bitrate: R59 | R72 | R80 | R96 | R132 | R164 | R244 | R320 | R480 | R640 | R960 | R1280 Lower end of the range, 5.9 kbit/s to 128 kbit/s
Bitrate_Higher: enums.Bitrate: R59 | R72 | R80 | R96 | R132 | R164 | R244 | R320 | R480 | R640 | R960 | R1280 Upper end of the range, 5.9 kbit/s to 128 kbit/s
- get(ims=<Ims.Default: -1>, virtualSubscriber=<VirtualSubscriber.Default: -1>) → RangeStruct[source]
# SCPI: CONFigure:DATA:CONTrol:IMS<Suffix>:VIRTualsub<VirtualSubscriber>:EVS:SEND:BITRate:RANGe value: RangeStruct = driver.configure.data.control.ims.virtualSubscriber.evs.send.bitrate.range.get(ims = repcap.Ims.Default, virtualSubscriber = repcap.VirtualSubscriber.Default)
Selects the bit-rate range supported in the EVS primary mode in the downlink (send) direction. The value must be compatible to the selected bandwidth. The setting applies only if the uplink and the downlink are configured separately, see method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Synch.Select.set.
- param ims
optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Ims’)
- param virtualSubscriber
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘VirtualSubscriber’)
- return
structure: for return value, see the help for RangeStruct structure arguments.
- set(structure: RsCmwDau.Implementations.Configure_.Data_.Control_.Ims_.VirtualSubscriber_.Evs_.Send_.Bitrate_.Range.Range.RangeStruct, ims=<Ims.Default: -1>, virtualSubscriber=<VirtualSubscriber.Default: -1>) → None[source]
# SCPI: CONFigure:DATA:CONTrol:IMS<Suffix>:VIRTualsub<VirtualSubscriber>:EVS:SEND:BITRate:RANGe driver.configure.data.control.ims.virtualSubscriber.evs.send.bitrate.range.set(value = [PROPERTY_STRUCT_NAME](), ims = repcap.Ims.Default, virtualSubscriber = repcap.VirtualSubscriber.Default)
Selects the bit-rate range supported in the EVS primary mode in the downlink (send) direction. The value must be compatible to the selected bandwidth. The setting applies only if the uplink and the downlink are configured separately, see method RsCmwDau.Configure.Data.Control.Ims.VirtualSubscriber.Evs.Synch.Select.set.
- param structure
for set value, see the help for RangeStruct structure arguments.
- param ims
optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Ims’)
- param virtualSubscriber
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘VirtualSubscriber’)