Dpd¶

SCPI Commands

CONFigure:DATA:CONTrol:EPDG:DPD:ENABle
CONFigure:DATA:CONTrol:EPDG:DPD:INTerval
CONFigure:DATA:CONTrol:EPDG:DPD:TIMeout

class Dpd[source]

Dpd commands group definition. 3 total commands, 0 Sub-groups, 3 group commands

get_enable() → bool[source]

# SCPI: CONFigure:DATA:CONTrol:EPDG:DPD:ENABle
value: bool = driver.configure.data.control.epdg.dpd.get_enable()

Enables dead peer detection.

return

dpd_enable: OFF | ON

get_interval() → int[source]

# SCPI: CONFigure:DATA:CONTrol:EPDG:DPD:INTerval
value: int = driver.configure.data.control.epdg.dpd.get_interval()

Configures the inactivity time interval for dead peer detection.

return

dpd_interval: Range: 1 s to 100 s, Unit: s

get_timeout() → int[source]

# SCPI: CONFigure:DATA:CONTrol:EPDG:DPD:TIMeout
value: int = driver.configure.data.control.epdg.dpd.get_timeout()

Configures the no answer timeout for dead peer detection.

return

dpd_timeout: Range: 1 s to 10E+3 s, Unit: s

set_enable(dpd_enable: bool) → None[source]

# SCPI: CONFigure:DATA:CONTrol:EPDG:DPD:ENABle
driver.configure.data.control.epdg.dpd.set_enable(dpd_enable = False)

Enables dead peer detection.

param dpd_enable

OFF | ON

set_interval(dpd_interval: int) → None[source]

# SCPI: CONFigure:DATA:CONTrol:EPDG:DPD:INTerval
driver.configure.data.control.epdg.dpd.set_interval(dpd_interval = 1)

Configures the inactivity time interval for dead peer detection.

param dpd_interval

Range: 1 s to 100 s, Unit: s

set_timeout(dpd_timeout: int) → None[source]

# SCPI: CONFigure:DATA:CONTrol:EPDG:DPD:TIMeout
driver.configure.data.control.epdg.dpd.set_timeout(dpd_timeout = 1)

Configures the no answer timeout for dead peer detection.

param dpd_timeout

Range: 1 s to 10E+3 s, Unit: s